Since 2014 we have manufactured tens of thousands of indoor and outdoor LCD Monitors and touchscreens. Count on our real-world knowledge and experience to ensure trouble-free roll-outs with unmatched service and support for any size of project.
As an electronic manufacturer, we design and purpose-build LCD monitors and touchscreens from the ground up, to any specification.
Learn more about our history and capabilities. Book a safe, live, virtual tour with us below.
Real-world knowledge and experience in deploying thousands of digital signage are vital.
USMART has been the key display provider in some of the largest digital display deployments in China for over 10 years.
From initial contact to product shipment and beyond, USMART is dedicated to supporting our partners and end-users by ensuring their digital display solution meets the expectations and needs of their organization and clients.
Resilience/Strength
USMART are built to much higher standards physically. They are designed to withstand impacts from all sides, not just the front screen. They are designed to withstand 100 km/hr. wind gusts. using thicker gauges of materials throughout.
Industrial grade monitors are rated to provide 50-70K hours of useful life. Most commercial monitors are 50K hours or less.
Industrial-grade LCDs have a controlled Bill Of Materials (B.O.M.). That means the parts used are guaranteed to be available for at least 5 years. This allows the same model to be available for much longer than commercial monitors, which have same-model availability of only 1 or 2 years typically.
Due to the controlled B.O.M., an industrial-grade monitor can be repaired for at least 5 years, with every part available for replacement. Commercial monitors are virtually unrepairable. Few spare parts are available for purchase. This has major environmental impacts. An industrial-grade monitor can be kept in service for far longer than a commercial monitor.
Industrial grade monitors can tolerate more extreme conditions than commercial products. Industrial monitors have a wider operating temperature of up to -40 to +70c, versus -20 to +50 for commercial monitors, and can work in environments with high levels of shock and vibration.
Most commercial monitors have exposed fans, air filters or connections on the rear panel. Industrial grade monitors do not. As such, commercial monitors must be placed in secondary enclosures to provide rear panel protection. Industrial grade monitors can be installed on their own, directly exposed to all weather from all sides.
USMART monitors have sealed cable glands rated as high as IP67, and/or direct conduit entry, commercial monitors do not (IP54 at best).
Wechat scan code follow us
24-hour hotline+8675585207417
Phone+8617724703657
Copyright © 2017-2023 USMART All Rights Reserved. Sitemap